Yaesu FT-1907R Operating Manual page 57

I
NTERNET
FRG "F
4. Rotate the DIAL knob to select "
"#": the first digit of the DTMF string).
5. Press the [ LOW ( A/N )] key momentarily to accept the first digit and move to the second
digit of the DTMF string.
6. Repeat the previous steps until you have completed the ac-
cess code ("#(F)1101D").
7. If you wish to attach an alpha/numeric name "Tag" to the Internet Memory, proceed to
the next step; otherwise press and hold in the [ MHz ( SET )] key for one second to save
the setting.
8. Press the [ MHz ( SET )] key twice to enable programming of the name tag (the Internet
Memory register number will blink).
9. Press the [ D/MR ( MW )] key momentarily. The "--ALPHA--"
notation will appear on the display for 2 seconds, then the
Memory register number will blink again.
10. Press the [ MHz ( SET )] key momentarily. The first digit will blink.
11. Rotate the DIAL knob to select the first digit of the desired
label.
12. Press the [ LOW ( A/N )] key to move to the next character.
13. If you make a mistake, press the [ REV ( DW )] key to back-space the cursor, then re-enter
the correct letter, number, or symbol.
14. Repeat steps 11 and 12 to program the remaining letters,
numbers, or symbols of the desired label. A total of six char-
acters may be used in the creation of a label.
15. When you have finished programming the label (6 characters or less), press and hold in
the [ MHz ( SET )] key for one second to confirm the label.
16. Repeat steps 1 through 15 to store other access codes, if so desired.
17. Press the PTT switch to save the setting and exit to normal operation.
Operation (Accessing an FRG Node)
1. Press and hold in the [ MHz ( SET )] key for one second, then
rotate the DIAL knob to select "23 INT MD."
2. Press the [ MHz ( SET )] key, then rotate the DIAL knob to set this Set Mode Item to
FRG
" " (thus activating the "Other Internet Link System"
mode).
3. Press and hold in the [ MHz ( SET )] key for one second to save the new setting.
4. Press the [ ] key momentarily to activate the Internet Con-
nection feature. The "Int" notation will appear at the right
of the frequency.
5. Rotate the DIAL knob while pressing the [
FT-1907R O
PERATING
C
ONNECTION
' R
RIENDS ADIO
F " (representing DTMF
M
ANUAL
G " M
ROUP
] key to select the Internet Memory register
F
EATURE
ODE
53