Caller Id - NEC i-Series Alphanumeric Display Feature Handbook

Caller ID allows a display keyset to show an incoming caller's tele-
phone number (up to 12 digits) and optional name. The Caller ID
information can be displayed either before or after answering a call.
Normally, the system provides the Caller ID post-answer display.
With the pre-answer display, you can preview the caller's number
before picking up the ringing line. Your Communications Manager
can tell you which option you have. This information is stored in
Caller ID bins.
Display telephone users have the ability to check the identity of an
incoming call while they are currently busy on a call. The type of
information that displays will depend on the type of call being
received. Intercom calls will display station names, while incoming
trunks calls will display Caller ID, ANI or the name assigned to the
line. Depending on the system programming, this information can be
displayed either automatically or manually.
Caller ID will temporarily store 16 calls (this included abandoned or
unanswered calls). New calls replace the old calls when the maximum
number of calls is reached.
To display the name/
number for your
incoming call ( with
Automatic Handsfree
on Incoming
Line/Loop Key calls):
To display the
name/number for
your incoming call
( without Automatic
Handsfree enabled):
1. Press +
If the Caller ID data includes the
name, you can scroll left and right by
pressing * and #.
2. Press
1. Do not lift the handset and press
If the Caller ID data includes the
name, you can scroll left and right by
pressing * and #.
2. or press

Caller ID

.
to answer the call.
to answer the call.
.
27