Middle Fairing Removal - Honda CBR600RR 2007 Owner's Manual

Middle Fairing Removal

Refer to Saf ety Precautions
The middle fairing must be removed to
access the spark plugs.
The right and left middle fairings can be
removed in the same manner.
Removal
1. Remove the bolts ( ).
2. Remove the clips A ( ).
3. Pull the clip B ( ) out. 3
4. Remove the middle fairing ( ) and
disconnect the front turn signal
connector ( ). 5
Be careful not to apply weight to the
middle fairing.
Carefully release the each tabs.
Installation
Installation can be done in the reverse
order of removal.
90
Servicing Your Honda
on page 70 .
1
2
4
LEFT SIDE (right side similar)
(2) (2)
(3)
(1) bolts (4) middle fairing
(2) clips A (5) front turn signal
(3) clip B
(4)
(5) (1)
connector