Start Button; Engine Stop Switch - Honda CBR600RR 2007 Owner's Manual

Start Button

The start button ( ) is used for starting the 1
engine. Pushing the button in starts the
engine. See Starting Procedure,
When the start button is pushed, the starter
motor will crank the engine; the headlight
will automatically go out, but the position
light, taillight and license light will stay on.
The engine will not operate if the engine
stop switch is in the OFF position when
the start button is pushed.

Engine Stop Switch

RIGHT HANDLEBAR
page 52 .
(1) start button
(2) engine stop switch
The engine stop switch ( ) is used to stop
the engine in an emergency. To operate,
push the switch to the OFF position. The
switch must be in the RUN position to
start the engine, and it should normally
remain in the RUN position even when the
engine is OFF.
Controls & Features
(2)
Instruments & Controls
(1)
OFF
RUN
2
35