Honda CBR600RR 2007 Owner's Manual page 131

Suspension
Front Suspension Spring
Pre-load
Refer to Saf ety Precautions
FRONT
(1) spring pre-load adjuster
Adjust the spring pre-load by turning the
spring pre-load adjuster ( ) with a 19 mm
wrench.
122
Servicing Your Honda
on page 70 .
(1)
1
To adjust to the standard position:
1. Turn the spring pre-load adjuster
counterclockwise until it will no longer
turn (lightly seats). This is the full soft
setting.
2. Turn the adjuster clockwise
This is the standard position.
3. Make sure that both fork legs are
adjusted to the same position.
To Reduce Spring Pre-load (SOFT):
For a light load and smooth road
conditions, turn the adjuster
counterclockwise toward SOFT.
To Increase Spring Pre-load (HARD):
For a firmer ride and rough road
conditions, turn the adjuster clockwise
toward HARD.
5 turns.