Honda CBR600RR 2007 Owner's Manual page 133

Suspension
Compression Damping
RIGHT SIDE
(3)
(2)
(1) damping adjuster
(2) punch mark
(3) reference punch mark
To adjust to the standard position:
1. Turn the damping adjuster ( )
clockwise until it will no longer turn
(lightly seats). This is the full hard
setting.
124
Servicing Your Honda
(1)
1
2. Turn the adjuster counterclockwise
approximately
punch mark ( ) on the adjuster aligns 2
with the reference punch mark ( ). This
is the standard position.
3. Make sure that both fork legs are
adjusted to the same position.
To Reduce Compression Damping
(SOFT):
For a light load and smooth road
conditions, turn the adjuster
counterclockwise toward SOFT.
To Increase Compression Damping
(HARD):
For a firmer ride and rough road
conditions, turn the adjuster clockwise
toward HARD.
2 turns so that the
3