Honda CBR600RR 2007 Owner's Manual page 65

Shifting Gears
Avoid downshifting to help slow your
motorcycle when engine rpm is near its
allowable maximum (near the
tachometer red zone). In this situation,
the rev limiter in the engine ignition
control module may not prevent
excessive engine speed which could
damage the engine.
To prevent transmission damage, do not
coast or tow the motorcycle for long
distances with the engine off.
Recommended Shift Points
Ride in the highest gear that lets the
engine run and accelerate smoothly. This
will give you good fuel economy and
effective emissions control. When
changing gears under normal conditions,
use these recommended shift points:
56
Basic Operation & Riding
Shif ting Up:
From 1st to 2nd:
From 2nd to 3rd:
From 3rd to 4th:
From 4th to 5th:
From 5th to 6th:
Shif ting Down:
From 6th to 5th:
From 5th to 4th:
From 4th to 3rd:
Pull the clutch lever in when speed drops
below 12 mph (20 km/h), when engine
roughness is evident, or when engine
stalling is imminent; and shift down to 1st
gear for acceleration.
12 mph (20 km/h)
19 mph (30 km/h)
25 mph (40 km/h)
31 mph (50 km/h)
37 mph (60 km/h)
28 mph (45 km/h)
22 mph (35 km/h)
16 mph (25 km/h)