Honda CBR600RR 2007 Owner's Manual page 197

If You Have a Flat Tire
3. Insert the rear axle shaft from the left
side, through the left swingarm, wheel
hub and rear brake bracket.
4. Install the drive chain by pushing the
rear wheel forward.
5. Install the rear axle nut and tighten the
drive chain adjusting bolts.
Refer to drive chain adjustment (page
146 ).
6. Tighten the rear axle nut to the
specified torque:
83 lbf·ft (113 N·m , 11.5 kgf·m)
Failure to provide adequate disc-to-rear
brake bracket clearance may damage
the brake discs and impair braking
efficiency.
188
Taking Care of the Unexpected
7. After installing the wheel, apply the
brakes several times, then recheck both
discs for caliper holder to disc clearance.
Do not operate the motorcycle without
adequate clearance.
If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Improper assembly may lead to loss of
braking capability.