Forwarding Calls - Telrad Executive set with expanded display User Manual

FORWARDING CALLS

You can program your telephone set to forward your calls
to another extension.
If your telephone does not have DN buttons, you
can forward calls for your station (as described
below, skipping the first step), but cannot forward
calls for a specific DN. See also below, Call For-
warding on telephones without DN buttons.
To program call forwarding
1. Press the button of the DN for which you want calls for-
warded.
2. Press {CALL FWD} .
3. Press {CALL FWD} , {BUSY} , or {NOANS} .
4. Press {ALL} , {INT} , or {EXT} .
5. Enter the new destination for Call forwarding.
Instead of dialing the extension number, you may
press a MEMORY button programmed with an
extension number (for internal calls only) - or press
a SPEED DIAL button (or press [SPD/PROG] and
a SPEED DIAL memory bin number) for internal or
external calls, as determined by the contents of the
memory. Calls are forwarded to the contents of the
MEMORY button or SPEED DIAL bin. If you
change the contents of the SPEED DIAL bin, calls
are forwarded to the new destination. This does
not apply to the MEMORY button.
26
NOTE
NOTE
Executive set with expanded display