Table of Contents
Advertisement
To select a message
2. Press the softkey adjacent to the desired message.
If the message includes asterisks (*), you may edit the
message using the dialpad. Enter digits on the dialpad;
they appear on the screen in place of the asterisks.
To send the message to the called extension
3. Press {SEND MSG} .
To send a message with confirmation
When you dial a display telephone and hear busy tone, you
can send a message which appears on the display of the
called extension.
1. Select a message, as explained above.
2. Press {SEND MSG} .
" WAIT ..", followed by the message text, appears on
your display. You see either " MSG ACCEPTED " or
" MSG REJECTED ". Rejected messages enter the
called extension's memory.
3. Hang up.
See also
Canceling the message process
You may cancel the message process at any time:
•
Press [FLASH].
RECEIVING MESSAGES
The system informs you, through the display, of up to six
messages waiting for you. When messages have been left
at your extension, your [MSG] indicator lights and you hear
broken dial tone when you lift the handset or press
[SPKR].
To read your messages
•
Press {MESSAGE} .
All your messages are displayed.
22
To confirm a message
Executive set with expanded display
, below.
Advertisement
Table of Contents
