Table of Contents
Advertisement
ATTACHING/REMOVING THE STAND & WALL MOUNTING
Attaching the stand
Fig 1 - Base of stand
Fig 2 - Neck
of stand (Already
attached to TV)
Fig 3 - Click
the base of
stand on to the
neck and secure
using the two
screws provided
Removing the stand
1) Remove the screws shown below
2) The stand will now come off
IMPORTANT— BEFORE DRILLING
ANY HOLES IN THE WALL ENSURE
YOU ARE NOT DRILLING WHERE
THERE COULD BE ANY ELECTRIC
WIRES, WATER OR GAS PIPES
THIS TV REQUIRES A VESA
100 WALL MOUNT, OR EQUIVALENT
1) Remove the four screws highlighted
below.
2) The wall mount can now be easily attached
to the mounting holes on the rear of the TV.
These holes are indicated in the picture below
Important – If wallmounting this TV,
only use the screws already
provided in the wallmounting holes.
Using other screws which are longer
could cause irrepable damage to
internal parts.
100
9
Advertisement
Table of Contents
