Table of Contents
Advertisement
185_38 english manual 09.pdf 21. 4. 2009 9:45:27
ATTACHING/REMOVING THE STAND & WALL MOUNTING
Attaching the stand
Fig 1
Fig 2 - Push the television onto the stand
Fig 3
Fig 4 - Screw in the 4 screws provided into the
base of the stand, to secure it
Removing the stand for wall mounting
1) Remove the screws shown
2) The stand will now come off
IMPORTANT— BEFORE DRILLING
ANY HOLES IN THE WALL ENSURE
YOU ARE NOT DRILLING WHERE
THERE COULD BE ANY ELECTRIC
WIRES, WATER OR GAS PIPES
THIS TV REQUIRES A VESA
100 WALL MOUNT, OR EQUIVALENT
1) Remove the four screws indicated below.
2) The wall mount can now be easily attached
to the mounting holes on the rear of the TV.
These holes are indicated in the picture below
Important – If wallmounting this TV,
only use the screws already
provided in the wallmounting holes.
Using other screws which are longer
could cause irrepable damage to
internal parts.
100
9
Advertisement
Table of Contents
