Table of Contents
Advertisement
REMOVING THE STAND & WALL MOUNTING
Removing the stand
1) Remove the two screws highlighted
below
2) The stand will now come off
IMPORTANT— BEFORE
DRILLING ANY HOLES IN THE
WALL ENSURE YOU ARE NOT
DRILLING WHERE THERE
COULD BE ANY ELECTRIC
WIRES, WATER OR GAS PIPES
THIS TV REQUIRES A VESA
100 WALL MOUNT, OR EQUIVALENT
1) Remove the four screws highlighted
below.
2) The wall mount can now be easily
attached to the mounting holes
on the rear of the TV. These holes are
indicated in the picture below
10
100
Important – If wallmounting this TV,
only use the screws already
provided in the wallmounting holes.
Using other screws which are longer
could cause irrepable damage to
internal part.
Advertisement
Table of Contents
