Attaching/Detaching The Stand And Wall Mounting - UMC X26G-GB-TCDU-UK User Manual

Attaching / Detaching the stand and wall mounting
DETACHING THE STAND
This television requires a VESA 400 x 200 wall mount, or equivalent.
Detaching the Stand
1) Remove the screws highlighted
2) Although there are no live parts exposed when removing the stand, (in the event of wall mounting the
TV) for aesthetic purposes, included in the accessory pack is a cover plate which can be clipped into the
underside of the TV.
IMPORTANT - Before drilling any holes in the wall ensure you are not
drilling where there could be any electric wires, water or gas pipes.
Wall mounting the TV
This television requires a VESA 200 x 100 (26'') wall mount, or equivalent.
1) Remove the four screws highlighted below.
2) The wall mount can now be easily attached to the mounting holes on the rear of the TV.
These holes are indicated in the picture below.
For optimum viewing, if wall mounting the TV
higher than eye level, the TV should be tilted
downwards so that the TV's screen is 'face on'.
See fi g 1 and 2
Important – If wall mounting this TV, only
use the screws already provided in the wall
mounting holes. Using other screws which
are longer could cause irreparable damage to
internal parts.
Helpline No UK. 0871 2000 463 ROI. 01443 3940
Web Support: www.skymediauk.co.uk
fi g 1
INCORRECT
CORRECT
fi g 2
TV
Viewing angle
TV
9 9