Attaching/Detaching The Stand And Wall Mounting - UMC W32/28-GB-TCU-UK User Manual

Attaching / Detaching the stand and wall mounting
DETACHING THE STAND
This television requires a VESA 400 x 200 wall mount, or equivalent.
Detaching the Stand
1) Remove the screws highlighted
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling
where there could be any electric wires, water or gas pipes.
Wall mounting the TV
1) Remove the four screws highlighted below.
2) The wall mount can now be easily attached to the mounting holes on the rear of the TV. These holes
are indicated in the picture below.
Important – If wall mounting this TV, only
use the screws already provided in the wall
mounting holes. Using other screws which
are longer could cause irreparable damage to
internal parts.
Helpline No UK. 0871 2000 463 ROI. 01443 3940
For optimum viewing, if wall mounting the TV higher than eye level,
the TV should be tilted downwards so that the TV's screen is 'face
on'. See fi g 1 and 2
Web Support: www.skymediauk.co.uk
fi g 1
INCORRECT
CORRECT
fi g 2
Viewing angle
TV
Viewing angle
TV
9 9