Advertisement
To ensure optimal performance of
your DPA Miniature Microphone,
please follow the simple care and main-
tenance instructions below.
Miniature Microphones from DPA are
designed to be very resistant to humidity,
moisture and sweat. Highly resistant mate-
rials like gold plated stainless steel, and fea-
tures like the double-vent-protection-sys-
tem are used in construction of the micro-
phones, to avoid damage by hostile fluids.
In any case, it is still a good idea to keep the
Miniature Microphones away from any kind
of unnecessary exposure to water and
cleaning fluids and to keep the microphone
element dry at all times.
2
Keep dry
CLEANING GUIDE
The cable and protection grid are the only
parts that may be cleaned if necessary. Do
not use any kind of cleaning fluid other
than distilled water. Use of ultra-sonic
baths must be avoided. Avoid all kinds of
spray or fluids, which contain chemical
components to remove static electricity on
or close to the microphone as this could
cause damage to the electret layer.
When mounting the Miniature Microphone
directly on the skin of a performer, care
should be taken to avoid sweat from run-
ning directly into the microphone. If the
microphone gets filled up with water or
sweat it will not be damaged, but possibly
turn deaf while the water is captured
inside the microphone, behind the protec-
tion grid. Remove the water by shaking the
microphone or drying it with a piece of lint
free cloth.
Sweat stopper
Hide quick links:
Advertisement
