USER’S MANUAL Cardioid Headband 4088 40 88 Type CONTENTS Introduction Placement Cleaning Guide Correct use of the Cardioid Headband 4088 Specifications Accessories Available Service & Repair Warranty CE Standard...
If the it will recover to its original specifications. The Cardioid Headband 4088 from DPA is is as good at the corner of the mouth as it microphone gets filled up with water or sweat...
To provide users with safe and compact guidelines concerning the daily use of the mounting of connectors, all Miniature microphone. Microphones from DPA are fitted with the MicroDot connector as standard. A broad Correct treatment of the microphone range of connection adapters is offered as...
Page 5
MicroDot con- Adjusting the 4088 headband soft cable begins to be visible). The remai- nector from DPA Microphones. The DPA The headband mount is telescopic and is ning two clips are not used (unless two MicroDot connector is specially designed easily adjusted to fit almost any headsize.
Page 6
Take up the 4088 and adjust the size of the If you want the position of the microphone headband so that it fits the size of your boom to be altered at this point, adjustments head: Start with mounting an oversized are still possible, simply by drawing the boom headband and use both hands simultane- while holding a firm grip with the other hand...
Cable drive capability: Power supply: Up to 300m (984ft) Min 5V – max 50V through the adapter sys- Typical on-axis frequency response of Cardioid Headband 4088 Microphone length: tem from DPA Microphones 11mm (0.5in) 0° Frequency range: Microphone diameter: 5.5mm (0.25in) 20Hz –...
SERVICE & REPAIR WARRANTY Products from DPA Microphones are All products from DPA Microphones are extremely stable, and there should not be covered by a two-year limited warranty on any significant change in the specifications both mechanical functionality and docu- with time and use.