The diaphragm is a nickel foil which has been coated Type 4035 is delivered with 3m cable. The 4037 has its cable mounted at with a ultra-thin polymer layer for optimum corrosion resistance. The...
Mounting the Headset Microphone Type 4035 Mounting the Headset Microphone Type 4035 Fig. 6. Mounting the Headset Microphone Type 4035. Strap the microphone around the headbrace of the headphone so the cable is also secured by the strap. Use the rubber block to protect the cable, ensuring there is enough slack to allow the microphone arm to be adjusted later.
No attempt should be made to remove it. If a replacement cartridge is • The Types 4033, 4036 and 4037 are delivered in a rugged case required, contact your local DPA Microphones representative. together with a reel for the cable. Inside the reel there is room for •...
Page 8
+45 48 14 28 28 or fax +45 48 14 27 00. Warranty All products from DPA Microphones are covered by a limited warranty on both their mechanical functionality and their documented specifications. We are so confident of the quality of these products, that this warranty is valid for one year from the date of purchase, as long as the items are not directly mistreated or abused.