Advertisement
Quick Links
Headset Microphones Manual
d:fine
d:fine
w w w . d p a m i c r o p h o n e s . c o m
w w w . d p a m i c r o p h o n e s . c o m / d f i n e
TM
TM
Omnidirectional
d:fine
TM
Directional
TM
d:fine
TM
4065
d:fine
4067
4066
TM
4088
d:fine
TM
d:fine
66
TM
88
d:fine
Advertisement
Related Manuals for DPA d:fine Directional
Summary of Contents for DPA d:fine Directional
- Page 1 Headset Microphones Manual d:fine Omnidirectional d:fine 4065 d:fine 4067 d:fine Directional 4066 4088 d:fine d:fine d:fine d:fine w w w . d p a m i c r o p h o n e s . c o m w w w . d p a m i c r o p h o n e s . c o m / d f i n e...
- Page 2 How to tell the difference between d:fine Headset Microphone capsules Introduction Omnidirectional characteristics • The microphone is sensitive to sound from all directions. All the d:fine Headset Microphones provide a uniquely natural and open sound. • The sound remains more or less the same regardless of Ultra-lightweight and adjustable, d:fine Headset Mics ensure a secure and the distance between the sound source and the microphone.
- Page 3 Adjusting the d:fine 4065 Adjusting the d:fine Omnidirectional, d:fine Directional, d:fine 66 and d:fine 4065 is pre-formed but may require adjustment in order to get a tight, fixed position to the back of The directional characteristics of the microphone is indicated on the flat microphone head with for omnidirectional and for directional as shown on page 3.
- Page 4 Position the microphone properly by pulling or pushing the boom along the slide. Service connector for exchange of cables or booms on the d:fine Omnidirectional, d:fine Direc- tional, d:fine 66 and d:fine Switch between left and right ear wearing style simply by rotating the microphone boom. Hold on to the earhook while gently These d:fine Headset Microphones offer exchange of cables or microphone booms.
- Page 5 (preferably 6 – 8 cm (2.5 – 3 in) diameter) and avoid kinks tors, all headsets from DPA are fitted with the MicroDot con- tic cap which serves to protect the microphone The supplied clothing clip allows you to attach in the cable.
- Page 6 Frequency Response of d:fine Omnidirectional Polar Pattern of d:fine Omnidirectional Frequency Response (d:fine 4065, 4066, 4067 and d:fine Polar Pattern (d:fine 4065, 4066, 4067 and d:fine 5 dB 80 Hz 20 Hz 1 kHz 125 Hz 4 kHz 8 kHz 250 Hz 16 kHz 500 Hz...
- Page 7 Max. SPL, peak before clipping Power supply (for full performance) 144 dB Min. 5 V - max. 50 V through DPA adapter for Power supply (for full performance) wireless systems. 48 V phantom power ± 4 V Min. 5 V - max. 50 V through DPA adapter for with DAD6001-BC XLR adapter wireless systems.