Advertisement
Adjust the approximate position that the
microphone boom should be placed on the
cheek between the ear and the mouth.
Hold the headband when pushing or pulling
the microphone boom. (Please note that
when placed near the ear, the high boost
grid should be used in order to compensate
for the high frequency loss in this position.)
Note: The capsule features an omnidi-
rectional transducer and it is therefore
not necessary to pull the capsule to the
front of the mouth. It can be placed
very discreetly on the cheek and still
produce a highly detailed and clean
sound by using the specially designed
DPA grids. Please see page 4.
10
Now take up the 4066 and adjust the size
of the headband so that it fits the size of
your head: Start with an oversized head-
band and use both hands simultaneously,
holding your index fingers on the back of
the headband while pushing in the ear
hook parts inwards with your thumbs. If
you want the position of the microphone
boom to be altered at this point, adjust-
ments are still possible, simply by drawing
the boom while holding a firm grip with the
other hand on the headband.
For discrete placement, you can now
choose to bend the microphone boom
slightly so that the capsule is as close to
the cheek as possible. This will minimise
Hide quick links:
Advertisement
