Table of Contents
Advertisement
CHAPTER 6: EMISSIONS/MATERIALS
6.1 Emission Maintenance – Global Maintenance
The emissions Global Maintenance functions may be accessed by clicking on the Emissions
Maintenance menu located at the top of the main screen. (See
erase all or some emission records, or "zero out" emission rates from selected emission rates.
This menu selection provides several choices for performing these functions. Also included is a
feature for calculating Ozone Season daily emission rates, based on:
• Annual tons of emissions
• Percent of operating hours during the ozone season, and
• Temperature adjustment factors that may have been entered under Contaminants
Maintenance and Equipment Relationships.
If users wish to make sure that the emissions for a given year have a Total Suspended Particulate
(TSP) record for each PM10 record containing at least as many tons of emissions as the PM10
record, then there is a feature that performs this maintenance function for an entire Account. The
rules that guide this procedure are as specified in Texas. After the Account is reviewed and
adjusted as necessary under this procedure, the TSP and PM10 emission rates for the plant will
COMPASS-EI–Manual – Chapter 6
MAINTENANCE, UTILITIES, AND
AGENCY EXPORT
Figure
Figure 6.1
6.1) Users may wish to
Page 47
Advertisement
Table of Contents
