Table of Contents
Advertisement
2.5 Activities and Materials
A list of Activities and Materials that pertains to the highlighted Source ID appears in the lower
left portion of the C&C screen. If the Account has been selected, program will show all the
Materials and Activities related to the Account. Available Materials and Activities information
won't be displayed for specific Source unless Source ID is highlighted. To add or edit materials,
highlight the appropriate Source ID and then double-click in the Activities and Materials window
(even if it is empty). This action will bring up a list of the existing Materials and Activities. To
edit existing data or to add new materials and activities in this list, various buttons such as Add,
Delete, Return, Save etc. are provided at the lower portion of that screen. To perform an
operation on any row, select the required row using the green arrow from the left side.
2.6 Emissions
The Emissions window, located in the lower central part of the C&C screen, serves several
purposes, as explained in this section.
1. The first function is totaling and displaying emissions by criteria pollutant category for
the highlighted Account, and/or Source, and/or Emission Point. For example, when the
user first brings up the C&C screen, clicking on a Year and Account as discussed above,
the emission totals by criteria pollutant category for the entire Account will be calculated
and displayed in the Emissions window. This function can be run at any time by clicking
on the radio button located near the top of the Emissions window labeled Total By
Category. If, instead, the user clicks on a specific Source ID on the Source list, then
clicks on the same radio button, total emissions will be calculated and displayed by
criteria pollutant category for the Source ID only. Emissions by category for Emission
Points works the same way.
COMPASS-EI–Manual – Chapter 2
Figure 2.9
Page 16
Advertisement
Table of Contents
