Process Data Control COMPASS-EI User Manual page 18

Compliance assurance system emissions inventory module
Table of Contents

Advertisement

Figure 2.8
Equipment relationships involving control devices are entered in the Equipment Relationships
screen, as explained earlier. If a control device "feeds" another device that occurs immediately
"downstream" from it, then two relationship records would be expected in this screen. One
record would describe the relationship between a Source, Point, and the first Control device in
the series. The second record would describe the relationship between the same Source, Point,
and the second Control device in the series. In this record, the first device is included under the
column header called "Feeding CIN". When the "Feeding CIN" column is blank in a relationship
record that contains a control device, EI assumes that the flow originates at the Source – not
another Control device.
Parallel (as opposed to series) control schemes are easily accommodated by using the percent
flow field in the Equipment Relationships screen to explain the allocation of flow to each "leg" in
the network. Control schemes that consist of both series and parallel networks can also be
accommodated in EI. Essentially, each node in the control scheme network is explained in an
equipment relationship record with respect to the Source, Point, and Control Device(s) for that
node.
EI will provide a selection for Control Devices that have previously been entered as a CIN that
references the Source and Point which have been designated by the user. Thus, if an equipment
relationship record is being added by the user, and the control device that should be entered is
not available on the drop-down list, the user should cancel the procedure and make sure that a
CIN has been entered for the desired relationship.
The Equipment Relationships screen
(Figure
2.9) allows relationships for a specific Source,
Point, or Device to be produced by selecting the entire ID Number or a portion thereof and
clicking on the List icon to retrieve only the items corresponding to your selection.
COMPASS-EI–Manual – Chapter 2
Page 15

Advertisement

Table of Contents
loading

Table of Contents