Table of Contents
Advertisement
PLTSUPER – Plant Superintendent
PLTCONTACT – Plant Contact
PRODMGR – Production Manager
REGSPEC – Regulatory Specialist
SAFENVDIR – Safety and Environmental Manager
SITE_CORD – Site Coordinator
TECHMGR – Technical Manager
UNITENGR – Specific Unit Engineer
VP_MFGING – Vice President Manufacturing
VPOPER – Vice President Operations
4. First Name (Mandatory).
Represents the first name of the contact. Limit 35 characters.
5. Middle Name.
Represents the either the middle name or the initial of the contact. Limit 35 characters.
6. Last Name (Mandatory).
Represents the last name the contact. Limit 35 characters.
7. Suffix.
Represents the standard suffix for the contact.. Limit 8 characters. (Examples: PhD., PE.,
MD., etc.)
8. Email
.
Represents the electronic mail address for the contact. Limit 50 characters.
9. Phone Number (Mandatory).
Represents the phone number or cell number of the contact, consisting of a 3-digit area
code and 7- digit telephone number with no punctuation (e.g. 5122390000).
10. Phone Extension (Mandatory if the extension is needed to reach the contact).
Represents the phone extension number if the call must go through this extension to reach
the contact.
11. Country Code (Mandatory for the phone numbers outside the United States)
This information is required if the contact information is outside the United States.
Business 1 Contact Information:
Primary address of the contact's place of business.
1. Address 1 (Mandatory).
The first line of the address, this field should contain either the street address or, if only a
post office box address is available, the PO BOX. This field must be text no longer than
50 characters.
COMPASS-EI–Manual – Chapter 4
Page 22
Advertisement
Table of Contents
