Setting Up Contact Information - Process Data Control COMPASS-EI User Manual

30. Inspection Fee.
Represents the fee that the owner or operator of each account should pay to the
commission for each fiscal year.

3.3 Setting Up Contact Information

The following are data elements that are needed for the set up of Contact Information. Contact
Information is available under file menu. Complete the contact information if some or all of the
information is new or changed. This information is helpful for the agency to contact the
appropriate person(s) regarding the account.
1. Role Type (Mandatory).
There are two elements for the contact role type for the electronic reporting.
Consultant
2. Prefix.
Represents the standard prefix for the contact.. Limit 8 characters.
Ms., Dr., etc.)
3. Title (Mandatory).
If the Contact Role Type is Consultant, then the value for the Title attribute must also be
CONSULTANT. If the Contact Role Type is EMISSINV (emissions inventory), then the
value for the Title attribute must be one of the values as following:
AIRCOMPDIR – Air Compliance Director
AIRQLTENG – Air Quality Engineer
AIRQLTSPEC – Air Quality Specialist
COMPPRES – Company President
COMPENG – Compliance Engineer
CONSULTANT – Consultant
CONTRLR - Controller
OPMGR – Operations Manager
EHSCOORD – Environmental, Health and Safety Coordinator
EHSMGR – Environmental, Health and Safety Manager
ENGINEER – Engineer
ENVCOORD – Environmental Coordinator
ENVENGR – Environmental Engineer
ENVMGR – Environmental Manager
ENVSPEC – Environmental Specialist
GENMGR – General Manager
MGR – Manager
OPMGR – Operations Manager
PLANTENGR – Plant Engineer
PLANTMGR – Plant Manager
COMPASS-EI–Manual – Chapter 4
EMISSINV (Emissions inventory)
(Examples: Mr., Mrs.,
Page 21