Process Data Control COMPASS-EI User Manual page 37

2. Material
Pick the material associated with the Source ID from the drop down.
3. Activity
Pick the activiyt associated with the Source ID from the drop down.
4. Quantity
Represents the specific amount of material the FIN or Source processed. It is numeric
value and no longer than 12 digits including 4 decimal places.
5. Units
The material quantity must have a valid unit of measurement in the unit field. Pick the
relevant unit from the dropdown.
6. From Date
Represents that date within the inventory year when the FIN began processing the
material.
7. To Date
Represents that date within the inventory year when the FIN ceased processing the
material. FINs can process multiple materials during the same time period. For example,
a combustion unit can burn two fuels, or storage tank can store multiple materials. Each
specific material will have an associated FROM and TO date.
8. Factor Quantity
Emission factor numeric value.
9. Numerator Units
Emission factor numerator unit as in lbs for lbs/MMBtu.
10. Denominator Units
Emission factor denominator unit as in MMBtu for lbs/MMBtu.
11. DAR rating
Emission factor confidence rating, such as A,B,C,D or E from AP-42.
COMPASS-EI–Manual – Chapter 4 Page 34