OPERATING INSTRUCTIONS
VERF
4.6.18 Verify
VERIFY <host download command>
VERIFY <T>
where:
<host download command> compare memory to host port download data.
As equipped from the factory the EVBU only supports the VERF
<T> variation of the verify command.
The VERIFY command is similar to the LOAD command except that the VERIFY command
instructs the EVBU to compare the downloaded S-record data to the data stored in memory.
>VERIFY T<CR>
Done
>
>VERIFY T<CR>
error addr E000
>
Refer to the downloading procedures at the end of this chapter for additional information
pertaining to the use of the VERF command.
4-32
<T> compare memory to terminal port download data.
NOTE
Enter verify command.
Verification completed.
Enter verify command.
Mismatch encountered.
Error message displaying first address that failed to
verify.
(NOT APPLICABLE TO EVBU)
EXAMPLES
DESCRIPTION
Verify
M68HC11EVBU/D