Motorola M68HC11EVBU User Manual page 55

Table 4-2. Monitor Program Commands (continued)
Command
REGISTER
RM [p,x,y,a,b,c,s]
STOPAT <address>
T [<n>]
TM
TRACE
VERIFY <T>
XBOOT [<address1> [<address2>]]
?
[<address>]/
1. On newer MC68HC11 mask sets, CONFIG can only be changed in special test or
bootstrap modes of operation.
2. * Refer to Appendix A for S-record information.
M68HC11EVBU/D
Description
(same as RM)
Register modify/display user registers
Stop at address
Trace $1-$FF instructions
Enter transparent mode
(same as T)
Compare memory to download data via terminal port
Send program to another M68HC11 via bootstrap mode
(same as HELP)
(same as MM [<address>])
NOTES
OPERATING INSTRUCTIONS
4-9