Configuration Through A Central Server - Grandstream Networks BudgeTone-101 User Manual

BudgeTone-100 User Manual
5.2.4 Rebooting the phone from remotely
The administrator of the phone can remotely reboot the phone by pressing the
"Reboot" button at the bottom of the configuration menu. Once done, the
following screen will be displayed to indicate that rebooting is underway.
You may relogin by clicking on the link below in 30 seconds.
At this point, the user can relogin to the phone after waiting for about 30 seconds.

5.3 Configuration through a Central Server

Grandstream IP phones can be automatically configured via a central provisioning
system called Grandstream Automated Provisioning System (GAPS).
With GAPS, a service provider or an enterprise with large deployment of IP phones can
easily manage the configuration and service provisioning of individual devices remotely
and automatically via a central server. GAPS uses enhanced (NAT friendly) tftp and
other communication protocols to communicate with each individual IP phone even if
the phone is behind a NAT.
GAPS must be used to support automated configuration of an IP phone. To enable this
feature on the phone, the user just needs to enter the IP address of GAPS server in the
tftp server field of the configuration screen. Then power cycle the phone.
Grandstream IP Phone Rebooting Status
The IP phone is rebooting now...
Click to relogin
28
Grandstream Networks, Inc.