Step 3: Enter Your Siriusxm Credentials - Sirius XM RAdio SiriusXM Music User Manual

Installation
Mono Audio Cable . Connect the Stereo
Audio cable to the Audio Out (L) (R) (white
and red) connectors, or the Mono Audio
Cable to the Mono Out connector (green) .
6 . Set the Impedance Switch to the correct
impedance for your audio system . Most devices use the 8 ohms
setting, but some IP based phone systems may require the 600 ohm
setting .

Step 3: Enter Your SiriusXM Credentials

1 . From the Main Screen, turn the Scroll knob to the right to highlight
Settings and press the knob to select .
2 . Turn the Scroll knob to highlight Credentials and press the knob .
3 . First enter the username that SiriusXM provided to you . The username
is case sensitive . Turn the Scroll knob right and left to select a letter
or number and press the knob to select the letter . If you make a
mistake, press the BACK button to erase the last entry .
4 . Continue until you have finished entering the username . Then turn the
Scroll knob until END is displayed and press the knob .
5 . The Radio will display LOADING . . . while
the username is being verified . Username
updated will be briefly displayed if you
entered the correct username . If you have
entered an incorrect username, Username
does not exist will be displayed . You will
need to correct the username .
6 . Next you will be prompted to enter your
password . Enter your password in the
12
<Category List >
Settings
12:00 AM
Enter Username
~ CNL END
ABCDEF
12:00 AM
Loading...
|
12:00 AM
<AaB