Devices Menu; Notes On The Display Symbols In The Menu; Overview; Info - Aastra 610d User Manual

Devices menu

Devices menu
You can call up the Devices menu in the following ways:
• In Idle mode, press .
• In Idle mode, press and select Menu.

Notes on the display symbols in the menu

Save To make settings in the menu, you must open the respective setting window
with the Ok softkey. Your entry is then saved with the
Information You can display further information on the entries with the
Options You can open further submenus (e.g. Delete, Edit) with the
Esc / Back You can cancel entries with the Esc softkey and/or go one step back in the
menu.
Calling By pressing the
dial.

Overview

Info

This menu provides access to the call list, redial list and the voice box (if available).
Quick access to this information is also possible on the

Active features

You can quickly reach some important settings, such as Bluetooth, Mandown, Call filter, Profiles,
Alarm clock and Appointment, via this menu.
42
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
softkey.
softkey.
softkey.
softkey an entry is dialled directly or transferred into pre-
navigation key or via the key.
Devices menu

Phone book

Enables access to the private phone book and the system phone book.
This can also be quickly accessed with the or

Time/Alarms

In this menu you can set the date and time, program appointments and alarm clock times and
define the formats for the date and time display.

Audio

In this menu you can make settings for the volume, ringer and attention tones.

Call filter

The call filter* allows you to answer or block incoming calls. You can specify the call numbers and
the filter status in the menu.

Call diversion

Call diversion enables you to forward calls to other internal / external phones. A call can be forwar-
ded immediately, when the connection is busy or after a certain time.

System

In this menu you can specify the active system for your handset and administer registrations to diffe-
rent systems as well as read the IPEI number and information on the status of hardware and soft-
ware.

System menu

This menu enables you to set automatic call-back and call waiting functions.

Settings

Device settings, such as key lock, key programming, user name, display settings, illumination, Blue-
tooth etc., are available here.

Protection functions

This menu can be accessed via the PIN (Personal Identification Number). On delivery, it is 0-0-0-0 (4 x
zero). Here you can block the handset (lock), change the PIN, program an emergency number, enter
settings for the alarm sensor (in 630d only) as well as completely or partially reset the handset to its
state on delivery.
* if supported by the system
navigation key or via the key.
43