Getting Started; Installation And Setup; Startup Sequence; Configuration And Updates - Aastra Clearspan 6731i User Manual

3

Getting Started

3.1

Installation and Setup

If your system administrator has not already setup your 6731i, please refer to the Aastra Model
6731i Installation Guide for basic installation and physical setup of the 6731i.
 Your system or network administrator manages the configuration and updates for the IP
phones on the configuration server.
 New updates to your phone can be automatically scheduled from the server by your system
administrator. Automatic updates are scheduled during non-business hours or slow call
periods.
3.2

Startup Sequence

The 6731i automatically begins the startup sequence as soon as it is connected. The phone goes
through this process the first time you plug in your phone and every time you restart your phone.
The following screens display:
Aastra 53i
LLDP
Other startup screens will only appear the first time you connect your phone, or if your phone has
been set back to factory defaults.
3.2.1

Configuration and Updates

The 6731i then checks settings and looks for new configuration and firmware updates on the
configuration server. If a new update is found, the phone displays the update it is installing (either
"Updating Config" or "New Firmware"). This process could take a few moments while the
configuration server downloads the latest updates.
Updating
configuration
Checking for new
firmware
___________________________________________________________________________________________
CS AASTRA 6731i IP PHONE USER GUIDE V3.2.2
CLEARSPAN® IS A RGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD.
AASTRA – 2786-002
PAGE 19 OF 82