Powered Hand Tool; Edge Groomer - Hoover Vacuum Cleaner Owner's Manual

powered hand tool

CAUTION
!
To reduce the risk of injury from moving parts,
disconnect Powered Hand Tool from hose
before servicing.
Not to be used for grooming a pet.
how to Clean
3.19 Turn tool so bottom faces up. Rotate the
latches (A) on either side of tool.
3.20 Remove bottom plate (B).
3.21 Remove any debris and/ or hair from brushroll.
Replace bottom plate by aligning tabs along front
edge of tool. Rotate latches back into locked
position.

edGe GrooMer

WARNING
!
Agitator brushroll can start suddenly. Unplug
cleaner before turning it over.
when to replace
3.22 The edge groomers, located on both sides of
the front of the cleaner, should be replaced when
they appear worn.
how to replace
Remove bottom plate as described in Fig. 3.9.
Lift off both old edge groomers and slide new edge
groomers into position as shown.
Reposition bottom plate and secure with 4 Phillips
head screws (Fig. 3.13).
what to buy: edge Groomer
When purchasing a new Edge Groomer ask for
®
HOOVER part No. 39411018.
If desired, additional Edge Groomer can be
purchased at Hoover.com or 1-800-944-9200.
3.19
!
3.21
3.22
!
15 Actual model may vary from images shown.
Meijer.com
3.20
A
b