Filters - Hoover Vacuum Cleaner Owner's Manual

ChanGinG filter baG
Disconnect cleaner from electrical outlet.
CAUTION
!
To reduce the risk of injury from moving parts,
unplug vacuum before servicing.
Do not operate cleaner without either the
secondary or final filter in place.
removing bag door
3.1 To change filter bag, grasp top of bag door and
pull door forward. Remove door.
removing and installing filter bag
3.2 Grasp filter bag collar (A) and pull collar from
tube (B).
Note: Do not clean out old filter bag and reuse.
Discard used filter bag.
Hold new filter bag as shown. Align opening in filter
bag with (B). Push (A) firmly onto (B). Tuck in filter
bag.
replacing bag door
3.3 Reposition bag door by placing tab on bottom
of door into opening (C).
Press top of door to snap securely shut.

filters

secondary filter
CAUTION
!
To reduce the risk of injury from moving parts,
unplug vacuum before servicing.
Do not operate cleaner without either the
secondary or final filter in place.
3.4 The secondary filter (A), located behind the grill
in the bottom of bag compartment, protects the
motor from dirt particles.
If filter becomes dirty, pull off grill and lift out filter.
Hand wash filter in cold water with mild detergent,
then air dry.
Reposition dry filter and grill.
3.1
!
3.3
3.4
A
!
what to buy: secondary filter
Additional filter is available at Hoover.com or
call 1-800-944-9200. Use only genuine
HOOVER
When purchasing a new Secondary Filter, ask
for HOOVER
11 Actual model may vary from images shown.
3.2
C
®
Secondary Filter with your vacuum.
®
Part No. 38765023.
Meijer.com
A
B