Setting Ringer Volume Level; Setting Speaker Volume Level; Setting Handset Volume Level - Comdial Conversip EPI00G-L12 User Manual

Endpoint

Table of Contents

Other Advanced Features

mode.

Note: When the call ends, the system resets the loudness of all future

calls to the programmed (default) setting. For instructions in setting

your endpoint's default volume, see Section 7.10, Changing the

Default Volume Control.

7.9.1 SETTING RINGER VOLUME LEVEL

There are four ringer loudness levels

(plus an off position). To set these

levels, while your endpoint is on-hook

and idle, press the VOLUME UP or

VOLUME DOWN button once for each

change in loudness you desire. The

ringer sounds once for each change as

volume up

an example of the current setting.

volume down

Note: If you set the ringer to the OFF

position, your endpoint sounds a short ring burst once for each call

you receive at your station while the ringer is off.

There are eight speaker loudness levels. To set these levels for the

current call while on a call and in speakerphone mode, press the

VOLUME UP or VOLUME DOWN button once for each change in

loudness that you desire.

There are at least eight handset loudness levels that you can set for the

current call. While on a call and in handset mode, press the VOLUME

UP or VOLUME DOWN button once for each change in loudness that

you desire.

Comdial

Feb '05

Table of Contents

Conversip epi00g-i12