Sounds Settings - Pantech Verse User Manual

3. Press the Directional Key up or down to select
3. Reminder, then press the
• 1. Tone: Press the Directional Key
[SET]. To play the alert tone, press the Left Soft Key
• 2. Vibrate: Press the Directional Key
Key [SET].
• 3. Reminder: Press the Directional Key
Every 15 minutes or Off, then press the
EMERGENCY TONE
1. Slide the phone up, press the
9. Tools & Settings, 2. Sounds
4. Emergency Tone.
2. Press the Directional Key
press the Key [SET].
3. To view the help for Emergency
KEYPAD SOUNDS
To select keypad sounds when using the Keypad.
1. Slide the phone up, press the
2. Sounds Settings, 3. Keypad
2. Press the Directional Key up or down to select DTMF,
then press the Key [SET].
DTMF is the default setting for this device.
KEYPAD VOLUME
To set the keypad volume:
1. Slide the phone up, press the
2. Sounds Settings, 4. Keypad
84
1. Tone, 2. Vibrate or
Key.
up or down to select a ringer, then press the
[Play].
up or down to select On or Off, then press the
up or down to select Once, Every 2 minutes,
Key [SET].
Key [MENU], then press
Settings, 2. Alert Sounds,
up or down to select Alert, Vibrate or Off, then
Tone, press the Right Soft Key [Help].
Key [MENU], then press 9. Tools & Settings,
Sounds.
Cloud or Simple,
Key [MENU], then press 9. Tools & Settings,
Volume.
2. Adjust the volume by pressing the Directional Key
the Key [SET] to save the setting. To test the volume level, press the Left
Key
Soft Key
DIGIT DIAL READOUT
The Digit Dial Readout setting controls if digits are read out loud when you enter a
phone number with the QWERTY Keypad.
1. Slide the phone up, press the
2. Sounds Settings,
2. Press the Directional Key
Key [SET].
SERVICE ALERTS
To set any of the three Alert options to either On or Off:
1. Slide the phone up, press the
2. Sounds Settings,
2. Press the Directional Key
then press the
• Minute Beep: Alerts you every minute during a call.
• Call Connect: Alerts you when the call is connected.
• Software Update: Alerts you when a software update is available.
3. Press the Directional Key
Key [SET].
DEVICE CONNECT
Allows you to turn the Device Connect On or Off:
1. Slide the phone up, press the
2. Sounds Settings,
2. Press the Directional Key
Key [SET].
[Play].
Key [MENU], then press
5. Digit Dial Readout.
up or down to select On
Key [MENU], then press
6. Service Alerts.
up or down to select one of the following options,
Key.
up or down to select On
Key [MENU], then press
7. Device Connect.
up or down to select On
up or down, then press
01
02
03
9. Tools & Settings,
04
or Off, then press the
05
06
07
9. Tools & Settings,
or Off, then press the
9. Tools & Settings,
or Off, then press the
85