Using Aquos Link - Sharp Aquas LC-52LE920UN Operation Manual

Using AQUOS LINK
Controlling HOMI Equipment Using AQUaS LINK
USB2
Back panel vertical inputs
HOMI-certified cable'
• Use HOMI 1 to connect
ARC-compatible equipment.
--------~II
AQUaS LINK-compatible
Audio system
Optical fiber cable
HOMI-certified cable
AQUaS BD Player
What's AQUOS LINK?
• Using the HOMI CEC (Consumer Electronics Control) protocol, with AQUaS LINK you can interactively operate
compatible system equipment (Blu-ray disc equipment, AV amplifier, OVO).
• By connecting AQUaS LINK-compatible devices with HOMI-certified cables to the lV, you can control a
recorder or AV amplifier using the remote control of the lV.
• AQUaS LINK allows you to operate the HOMI-connected equipment with one remote control.
Example
I
'AC
-~·rn
r n
• Control the AQUOS LINK-compatible audio system
Set the volume of AQUaS LINK-compatible audio system.
• One Touch Recording
Press eREC while you are viewing a broadcast received with the AQUaS
LINK-compatible recorder. The AQUaS LINK automatically recognizes the
connected HOMI device and starts recording.
• One Touch Play
While the lV is in standby mode, it automatically turns on and plays back the
image from the HOMI source.
OPTION button will function only when AQUaS LINK is used.
• Single remote control
The AQUaS LINK automatically recognizes the connected HOMI device and
you can control the lV and the devices as if using a universal remote control.
DISPLAY
(W.rt.~~)
TV STB DVD'VCR AUDIO
CJ CJ CJ CJ
-
~
- II
----
1+4 • _
.REC
----
OPTION SLEEP
~Z~~~
FREEZE
_CJCJD
POWER
B
• For connecting the 1V to AQUaS LINK-compatible equipment, use commercially available cables.
• Point the remote control toward the 1V, not to connected HOMI equipment.
• Video noise may occur depending on the type of HOMI cable used. Make sure to use an HOMI-certified cable.
• Up to 3 pieces of HOMI recording equipment and one AV amplifier can be connected using this system.
• These operations affect the HOMI equipment selected as the current input source. If the equipment does not operate, turn on
the equipment and select the appropriate input source using INPUT.
Connected AQUaS LINK-compatible devices can be operated without
changing the settings of the remote control unit.
mm
• The above description is an example of the AQUaS LINK function.
• The steps in "AQUaS LINK Setup" on page 47 need to be completed beforehand.
• Refer to this operation manual and the operation manual of the AQUaS LINK device to be used with this 1V.
@-46