Faceplate Installation And Removal - FireplaceXtrordinair 36DV Owner's Manual

I
NSTALLATION
P 24
AGE
! We recommend you purge the gas line at this time (with the glass removed). This allows gas to be
detected once it enters the firebox, ensuring gas does not build up.
4 Replace the glass (follow the directions under "Glass Installation and Removal" on page 22)
5 Install the faceplate onto the fireplace by following the directions below (on black faceplates, check
the gold trim to make sure it is in place properly - check the upper corners to make sure they abut -
slide the side trim upwards if necessary).

Faceplate Installation and Removal

6 Turn on the gas to the fireplace.
7 Leak test all gas line joints leading to the gas control valve. Correct any leaks. Start the pilot flame
and main burners (see the directions on page 27 & 28 if uncertain). Leak test all gas line joints
leading from the gas control valve to the burner pan. Correct any leaks. Turn the main burner off
and check the pilot flame to make sure it burns correctly (see the picture on page 30).
(C .)
ONT