Tennant T12 Operator's Manual page 69

6. Place a block behind each wheel to prevent
the machine from rolling.
7. Lower the scrub head and turn off machine.
FOR SAFETY: When loading/unloading
machine onto/off truck or trailer, lower scrub
head and squeegee before tying down
machine.
8. Connect the tie--down straps to the right and
left stabilizer bars in front of the machine and
the holes in the rear jacking brackets at the
rear of the machine.
T12 9009910 (1- -2013)
9. If the loading surface is not horizontal or is
higher than 380 mm (15 in) from the ground,
use a winch to unload machine.
If the loading surface is horizontal AND is
380 mm (15 in) or less from the ground, the
machine may be driven off the truck or trailer.
FOR SAFETY: When unloading machine off
truck or trailer, use winch. Do not drive the
machine off the truck or trailer unless the
loading surface is horizontal AND 380 mm
(15 in) or less from the ground.
MAINTENANCE
67