Stopping The Engine; Moving By Hand - Husqvarna BZ6127TD/968999262 Operator's Manual

Stopping the Engine

Allow the engine to idle a minute in order to attain
normal operating temperature before stopping it if
it has been worked hard. Avoid idling the engine
for long periods.
1. Disengage the mower deck by depressing the
control.
2. On manual decks raise the mower deck by
pulling the lifting lever backward to the
transport position.
3. On power decks raise the deck by pulling back
the hydraulic switch on the console.
4. Move the throttle to the minimum position
(tortoise symbol). Turn the ignition key to the
stop position.
5. Move the steering controls outward.
6. When the mower is standing still, activate the
parking brake by pulling the lever back.

Moving by Hand

In order for the machine to be moved with the
engine turned off, the system relief valve on both
hydraulic pumps must be opened counter
clockwise 1/4-1/2 turn.
WARNING!
Make no adjustments without:
- the engine stopped,
- the ignition key removed,
- the parking brake activated.
OPERATION
Disengaging the mower deck
Raise the mower deck with the lifting lever on
manual decks
System relief valve on the hydraulic pump
BAM - 2
8011-552
33