Clearances; Location; Rollers - GE Monogram Use And Care Manual

INSTALLATION REQUIREMENTS
Refrigerator
Do not install refrigerator where
temperature will be below 60°F (16°C)

location

because it will not run often enough to
maintain proper temperatures.

Clearances

If the refrigerator is to be installed in a
corner, allow 2" between the hinges of the
refrigerator and the wall to ensure a 90°
door opening capability.
Leveling
This model has 4-point leveling. All 4
corners are supported by leveling legs.
The front wheels are non-adjustable; they
are only used for positioning the unit.
• To level the back of the unit, turn hex
• To level the front of the unit,
• Turn hex nut or front leveling
See the Installation Instructions
(Pub. No. 49-6473— 36), (Pub. No. 49-
6462— 42), (Pub. No. 49-6457— 48) for
complete directions.
20
IMPORTANT...Please Read Carefully.
nut located above the front wheels.
" open end wrench and
use a 1 1 ⁄
4
adjust the leveling legs.
leg clockwise to raise the unit,
counter-clockwise to lower
the unit.
Installation
Built - In Refrigerators
Do install it on a floor strong enough to
support a fully loaded refrigerator.
No other clearances at top, sides, or back
are required.
Hex nut
Wheel
Leveling leg