Storage Drawers - GE Monogram Use And Care Manual
For side-by-side 36″, 42″, 48″ built-in refrigerators
Hide thumbs
Also See for Monogram:
- Owner's manual (45 pages) ,
- Use and care manual (32 pages) ,
- Installation instructions manual (12 pages)
Table of Contents
Advertisement
Drawers at the bottom of the fresh food
Drawer
compartment will stop before coming all
removal
the way out of the refrigerator, to help
prevent contents from spilling onto floor.
To remove a drawer, pull the drawer out.
Lift the front of the drawer up and out of
the wire holder. Lift the back of the drawer
up and out.
To remove the drawers when the
refrigerator door cannot be opened fully,
the shelf above the drawers must be
removed. Push the shelf back then lift up.
Tilt the cover and take it out.
To replace a drawer, place the back of the
drawer in the wire holder, making sure the
extensions of the side of the drawer fit into
the back of the wire holder. Lower the
front of the drawer into the wire holder.
Press firmly on the top of the drawer.
14
Storage Drawers
Built - In Refrigerators
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Monogram and is the answer not in the manual?
Questions and answers
Does temp in refrigerator give accurate inside temperature
Yes, some GE Monogram refrigerators have a digital temperature display that shows the actual inside temperature when the temperature controls are not being adjusted. Once adjustments are made, the display shows the set temperature for 5 seconds before reverting to the actual temperature. However, the actual temperature may vary slightly due to factors like door openings, food load, and room temperature.
This answer is automatically generated