Table of Contents
Advertisement
5.11 Auto skin detail
Use skin detail to change the detail level in a selected color range. Decreasing the detail level
of a person's skin color softens only the skin tones. But not only skin colors can be selected,
for example, decrease the detail level of a soccer field to accentuate the soccer players or
increase the skin detail level to accentuate a rough surface.
Carry out the Auto skin detail procedure as follows:
1.
In the VIDEO > SKIN > SKIN menu, select the memory position skin 1 or skin 2 (not 1+2).
2.
Place the cursor in front of the VIDEO > SKIN > AUTO item.
3.
Press the Select button. The following appears in the viewfinder:
-
3.2
4.
Point two small black boxes at the intended surface.
5.
Press the Select button to start the measurement procedure (the iris is set to Auto). The
process running message appears:
-
3.2
6.
When the process is completed (within a few seconds) the OK message appears in the
viewfinder.
7.
Adjust the skin detail level with the VIDEO > SKIN > SKIN LEVEL item. Decrease the
value below 50 to soften the selected area. Increase the value above 50 to add extra
detail.
68
++
REC
MED IA
+
BAT T
ND/RE
FOC+
ASKIN: window
4.7
5.6
7.5
FL
AW1
AW2
!
+
++
REC
MED IA
BAT T
ND/RE
FOC+
ASKIN: running
4.7
5.6
7.5
FL
AW1
AW2
!
Chapter 5 - Video setup
LDK 8300 High-speed HD camera User's Guide (v4.0)
Advertisement
Table of Contents
