Troubleshooting - Marmitek X-10 User Manual

interface). This is ideal for Home Theatre applications. Ask
your supplier for more information.
Clearing a macro button
1. Press the SETUP (8) button until one of the Mode LED's
stays lit. Release the SETUP button.
2. Press the MACRO (25) button. The LED will flash once.
3. Press the macro button you want to clear (M1, M2 or M3).
4. Press the SETUP (8) button again.

5. Troubleshooting

The remote doesn't work or loses codes entered
• Confirm with your original remote that the equipment
works correctly.
• Make sure that you have pressed the corresponding mode
key of the equipment or device that you want to control.
• If the listed code does not work, try the AUTOSEARCH
method or enter the next code of that brand.
• Check that the batteries have the correct polarity position.
• The programming of the remote requires 2 AAA Alkaline
batteries (new). If the remote looses codes within a few
days/weeks the problem can be solved by using 2 new
batteries.
• If the LED is lit permanently, in general it will be ecessary
to replace the batteries.
• Set the remote back to factory default.
How to set the Marmitek X-10 Remote back to factory default
(Master reset)
• Press and hold SETUP (8) until the LED indicator (2) lights
steadily. Release SETUP.
• Press and release the STOP key (20) twice.
• Press and release the .MUTE key (4).
• The LED (2) turns off after few seconds.
31