Table of Contents
Advertisement
English
6. Repeat this procedure from step 1 for the other equipment
you want to control (VCR, DVD, SAT,...). If your equipment
(TV, SAT, etc....) does not respond, try the other codes for
your brand. If it still doesn't respond, try the manual code
search method (4.4 Manual code search).
4.3 Automatic code search for some well-known brands
If your brand is listed hereafter, you can use the brand
search method (faster than the "manual" and the "automatic
code search").
BRAND
Philips & Sub brands / Radiola
Sony / Panasonic / JVC / Sharp
/ Akai / Toshiba / Daewoo
& Other Japanese brands
Thomson / Brandt / Ferguson
1. Turn on the device you want to control.
2. Press and hold SETUP (8) until the LED indicator (2)
lights steadily. Release SETUP button.
3. Press the mode button (3) that matches the equipment
you wish to control. The LED (2) blinks once.
4. Enter the code corresponding to your brand, point the
Marmitek X-10 Remote in the direction of your equipment,
press CHAN+ (5) once only. Continue to point the Marmitek
X-10 Remote at your equipment until the equipment
changes Channel (the remote control sends an IR signal
every second. Please wait until your equipment reacts).
When your equipment does react, press on the key -/-- (11)
to confirm. If you accidentally miss the code, you can stop
the autosearch by pressing CHAN-( 5) and by repeatedly
pressing this key return to the right code. Press -/-- (11) to
confirm.
Remark: if some functions of your equipment don't work,
you need to try another code for your brand. The search
function starts after the last confirmed code. For example, if
it was 030, the search function starts at 031, and it will keep
on trying until the last possible code.
4.4 Automatic code search for all brands
When searching an unknown code, you can step through the
library automatically (AutoSearch). When your equipment
responds, you can stop the searching process and store the
code you found.
Note: as you can dedicate any appliance (TV, DVD, SAT...)
to VCR, CBL, DVD, etc. keys, you need first to enter any 3
digit code for the kind of appliance you wish to control (found
in the code book), i.e.: If you want to program a SAT under
the VCR key, enter ANY SAT code found in the code book
and then follow the steps below:
1. Turn on the device you want to control.
2. Press and hold SETUP (8) until the LED indicator (2)
lights steadily. Release SETUP button.
3. Press the mode button (3) that matches the equipment
you wish to control. The LED (2) blinks once.
4. Press CHAN+ (5) once. After a few seconds the remote
starts stepping through the code library (fast search, 1 code
26
CODE
BRAND
1
Telefunken / Saba /
Normende
2
Grundig / Blaupunkt
3
Nokia / Finlux / ITT &
Other Scandinavian
brands
CODE
4
5
6
Advertisement
Table of Contents
