Table of Contents
Advertisement
Store operation notes:
1. After adjustment and operation with the RC-Z3, neglecting the Store operation before pressing a
file button loses the adjustment and setting item data. The output is the designated file data
prior to adjustment and operation.
2. After adjustment and operation with the RC-Z3, neglecting the Store operation before cutting off
the power loses the adjustment and setting item data. The output is the designated file data
prior to adjustment and operation.
Be sure to conduct the Store operation when desiring to save the data after adjustment and operation.
In this case, the data prior to Store are deleted.
0 R GAIN and
11
B GAIN control
10
Red and blue video signal gain can be adjusted.
adjusting.
Adjustment is coarse when the WHITE BALANCE mode select switch
set to Memory.
R BLACK and
13
12
Red and blue video signal black level can be adjusted. Press the ENABLE
adjusting.
Note: When CAM MODE AUTO, R & B black cannot be adjusted.
ENABLE button
14
・ON : Button lights to indicate R & B gain and R & B black adjustments are effective.
・OFF: Adjustments are ineffective when the ENABLE button is extinguished.
Note: When CAM MODE AUTO, the ENABLE button is ineffective.
54
B BLACK control
14
Press the ENABLE
is set to Preset and fine when
24
button (lights) to allow
button (lights) to allow
14
Advertisement
Table of Contents
