Hitachi Kokusai Electric HV-D27A Operation Manual page 67

3-ccd color camera

Hide thumbs Also See for HV-D27A:

Table of Contents

(1) File selection

Press the following buttons to change the camera and RC-Z3 settings.

・PRESET: Produces the standard setting mode

・SCENE FILE 1: FILE-1 (scene file 1) setting mode

・SCENE FILE 2: FILE-2 setting mode

・SCENE FILE 3: FILE-3 setting mode

・SCENE FILE 4: FILE-4 setting mode

Note: The pressed SCENE FILE button lights, then flashes when the application file data are changed.

Flashing continues if the data are changed or the original value is returned. When again pressed,

the button lights steadily.

(2) Setting data store

The Store function is used to save the application file item data. The common file item data are saved

during adjustment and operation.

・Store operation

After entering the settings with the menu screen and RC-Z3, press the STORE button (the STORE

button flashes).

button extinguishes).

・Store release

While the STORE button is flashing, again press the button. The STORE button extinguishes and

the mode is released.

・File data copy

Press the Preset or SCENE FILE button of the source, then press the STORE button (flashes).

Next press the SCENE FILE button of the destination file. The settings are copied and stored in

the designated file.

Then press the desired SCENE FILE button for storing the settings (STORE

Table of Contents

Hv-d37a