Error message
AUTO WHITE:NG
CHANGE TO CAM
TRY AGAIN
AUTO WHITE:NG
CHANGE TO MEMORY MODE
TRY AGAIN
AUTO WHITE:NG
LOW LIGHT
TRY AGAIN
AUTO WHITE:NG
HIGH LIGHT
TRY AGAIN
AUTO WHITE:NG
C.TEMP HIGH
TRY AGAIN
AUTO WHITE:NG
C.TEMP LOW
TRY AGAIN
AUTO WHITE:NG
LONG SHUTTER MODE
CHANGE SHUTTER MODE
TRY AGAIN
CAM MODE:AUTO
CHANGE TO MANUAL
44
・ Turn off the color bar.
・ Set up WHITE BAL:MEM.
・ White balance cannot be made due to insufficient illumination.
・ Increase the intensity of illumination, turn lens iris toward open
direction, or increase the gain to provide a proper video level.
・ Press the AWB switch again.
・ White balance cannot be made due to excess illumination.
・ Increase the intensity of illumination, turn lens iris toward closed
direction, or increase the gain to provide a proper video level.
・ Press the AWB switch again.
・ The color temperature is too high, making it impossible to reach the
optimum value in adjustment.
application, use the camera under the current condition.)
・ Add a filter to the lens or illumination to decrease the color temperature.
・ The color temperature is too low, making it impossible to reach the
optimum value. (If there is no problem in practical application, use the
camera under the current condition.)
・ Add a filter to the lens or illumination to increase the color temperature.
・Release the long shutter mode.
・Set camera mode to manual.
Procedure
(If there is no problem in practical