Hitachi Kokusai Electric HV-D27A Operation Manual page 70

3-ccd color camera

Hide thumbs Also See for HV-D27A:

Table of Contents

IRIS switch

Press the switch upward to set the mode in the sequence AUTO→REMOTE→MANUAL.

・ AUTO

: ALC operation

・ REMOTE: Iris is adjusted by the iris control

This function is ineffective in the HV-D27A/HV-D37A camera.

・ MANUAL: ALC operation

GAIN switch

Sets the camera sensitivity.

0→3→6→9→12→15→18→21→24 dB.

indication.

Note: When CAM MODE AUTO or AGC ON, the -3dB GAIN LED indicated all the time.

WHITE BALANCE mode select switch

The white balance mode can be selected in the sequence PRESET → MEM →AUTO.

・ PRESET: Optimum white balance at 3200 K and 5600 K color temperature. Select between 3200 K

and 5600 K in the menu mode at W. PRST MODE of the MAIN MENU screen.

・ MEM

: Press the A.WHT button

K and 5600 K in the menu mode at W. MEM MODE of the MAIN MENU screen.

: White balance is automatically adjusted in real time (ATW)

・AUTO

When the RC-Z3 white balance mode is set to MEM and AUTO, at the MAIN MENU, W. MEM MODE is

indicated and at PRESET, W.PRST MODE is indicated.

Note: When CAM MODE AUTO, camera white balance is automatic.

Selection from the RC-Z3 select switch is ineffective.

Press the switch upward to select the sensitivity in the sequence

The sensitivity setting is indicated by the combined GAIN LED

for automatic white balance adjustment. Select between 3200

Table of Contents

Hv-d37a