Chapter 7: Miscellaneous Scanner Options; Introduction; Scanning Sequence Examples; Errors While Scanning - Symbol LS3400 Product Reference Manual

Chapter 7
Chapter 7
Chapter 7
Miscellaneous Scanner Options

Introduction

This chapter includes commonly used bar codes to customize how the data is transmitted to the host device. In
addition to these bar codes for data formatting, see each host chapter for the appropriate host connections and
host device features for the scanner. See
host device.
Before programming, follow the instructions in
The scanner is shipped with the settings shown in the
7-2 (also see Appendix A, Standard Defaults
default values suit the requirements, programming may not be necessary. Features values are set by scanning
single bar codes or short bar code sequences.

Scanning Sequence Examples

In most cases, only one bar code needs to be scanned to set a specific parameter value.
Parameters, such as Prefix Value, require that several bar codes be scanned in the proper sequence. See
each individual parameter for descriptions of this procedure.

Errors While Scanning

Unless otherwise specified, if an error is made during a scanning sequence, re-scan the correct parameter.
Miscellaneous Scanner Options
Chapter 6, Symbologies for customizing data for transmission to the
Chapter 1, Getting Started.
Miscellaneous Scanner Options Default Table on page
for all host device and miscellaneous scanner defaults). If the